top of page


Trowel Crete is a three component 100% solids epoxy mortar designed for applications where excellent wear characteristics and strength is required.

What's it Good For?

Trowel Crete is recommended for heavy traffic areas, forklift traffic and steel wheel equipment production areas.

10% HC 1 (aq)

8 Hour Term Splash Spill

1,1,1 trichloroethane 

8 Hour Term Splash Spill

10% Sulfuric Acid

2 Hour Term Splash Spill

Ethyl Alcohol

2 Hour Term Splash Spill


2 Hour Term Splash Spill



5% Acetic Acid

10% Sodium Hydroxide

50% Sodium Hydroxide



8 Hour Term Splash Spill

8 Hour Term Splash Spill

2 Hour Term Splash Spill

2 Hour Term Splash Spill

2 Hour Term Splash Spill


  • Color stability may be affected by environmental conditions such as high humidity or chemical exposure.

  • Epoxy products are not UV color stable and may discolor if exposed to certain types of light such as sodium vapor lighting.

  • Colors may vary from batch to batch due to variations in the silica filler.

  • Mortar colors are not from our standard color chart.

  • Substrate Temperature must be 50℉ above dew point

  • For chemical exposure areas, we recommend a suitable topcoat to reduce porosity and chemical migration.

  • All new concrete must be cured for at least 30 days prior to application.

  • Applications Instructions will be included with your order.

  • Test data based on neat resin.

  • Physical properties are typical values and not specifications.

Top Coat:

None Required. For increased performance and reduced porosity, topcoat with FF1940 or FF195


None Required

Contact Fluid Floors


We're here to help! Take the first step towards a solution by filling out the contact form. We're available by phone, too!

bottom of page